Skip to content

Requirements ​

The device ​

An Anbernic RG35XX SP (Allwinner H700). Other H700 devices such as the RG35XX Plus, RG40XX or RG28XX are not supported yet: they share the chip, but differ in screen, controls and power wiring.

Check your memory type ​

RG35XX SP units ship with either LPDDR3 or LPDDR4 memory, and the bootloader has to set up the right one.

  • v0.1 is built for LPDDR3. On an LPDDR4 unit it doesn't start, and the green light blinks about once a second.
  • Builds after v0.1 try LPDDR4, then LPDDR3, so one image starts on both. No LPDDR4 unit has run one yet: if you have one, please help test it. Once it runs, Settings > SYSTEM > SYSTEM INFO shows the memory type on the MEMORY row.

You can read the memory type from the stock firmware card (or a muOS card) that boots on your unit. The first boot stage, boot0, starts 8 KiB into the card, and the 32-bit value at offset 0x3c in it is the type: 7 is LPDDR3, 8 is LPDDR4. On Linux, with the card in a reader at /dev/sdX:

bash
sudo dd if=/dev/sdX bs=1 skip=$((8192 + 0x3c)) count=4 2>/dev/null | od -An -tu4

If it prints 8, your unit has LPDDR4: v0.1 won't start on it, but the test image should.

TIP

Trying a card costs nothing: a card that doesn't boot does no harm, and the stock card still works afterwards. The internal storage is not touched.

A microSD card ​

  • At least 6 GB. 16 GB or more is better, as the games go on the same card.
  • The card goes in the TF1 slot (the one the stock firmware boots from).
  • Installing erases the card. Use a spare one, not the stock firmware card.

A second card in TF2 is optional and adds more games. It can be FAT32 or exFAT, and doesn't need anything from Tetsu OS. See A second card.

A computer ​

Any computer with a card reader can write the card. To build Tetsu OS yourself you need Linux; see Building from source.

A USB-C cable to a computer is useful but not required. Over the cable the device shows up as a USB drive for copying games, and as a network adapter for SSH and updates.

Optional ​

  • A Wi-Fi network (WPA2, 2.4 or 5 GHz) for network time, box art, cheats, RetroAchievements, Wi-Fi transfer, save backup and updates. WPA3-only and enterprise networks are not supported.
  • A Bluetooth controller or headphones.
  • A RetroAchievements account from retroachievements.org.

Tetsu OS is released under the MIT license. Emulator cores keep their own licences.